#1
|
|||
|
|||
Where to start
Hi folks,
Ive got a turbocharged Suzuki motorcycle I'm setting up for drag racing. It's got an Aquamist system on it that I had installed when it was a street bike, though it was never used very much. I'm trying to get a handle on how to best set things up. For example, should I use the water injection or just race gas? I'm initially planning to use about 16psi of boost with an 8.8-1 CR. I'm installing an o2 sensor/logger. Will water injection affect my readings? If I use the water injection, what's a good nozzle and at what point should I be activating it? Any suggestions or pointers will be appreciated. Thanks, Eric Marsh |
|
|