#21
|
|||
|
|||
Re: HFS-3 with big fuel injecters
I shall try it in the morning
|
#22
|
|||
|
|||
Re: HFS-3 with big fuel injecters
Once these IDC signal is noted, we can track down the late trigger problem.
__________________
Richard L aquamist technical support |
#23
|
|||
|
|||
Re: HFS-3 with big fuel injecters
Richard,
I had to leave town before completing the test. I'll be away until Christmas...will conduct the test upon return. |
#24
|
|||
|
|||
Re: HFS-3 with big fuel injecters
Finally manager to take the measurments and the results are as above in volt.
|
#25
|
|||
|
|||
Re: HFS-3 with big fuel injecters
It appears you are only see 50% of the fuel flow. I suggest you put in a x1.5 multiplier (underside of the circuit board). Cur x1 and link x1.5.
After solder modification please make another measure as before for me. You should be a much healthier signal on pin 16.
__________________
Richard L aquamist technical support |
|
|