#1
|
|||
|
|||
HFS-3 BMW E36
Don't mind the pics I am no photographer.
3.2L motor, 12.5lbs of Boost, Vortech V2-SQ Si trim All the bits... Some tunes and a Howerton 1.25G tank PVM Bracket 1.0 Jet Howerton Trim ring |
#2
|
|||
|
|||
Re: Hfs-3 bmw e-36
very nice install. Like the bracket and the right angle jet.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Hfs-3 bmw e-36
Nozzles installed....
|
#4
|
|||
|
|||
Re: Hfs-3 bmw e-36
Just love those 90 degree banjoo fittings.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Hfs-3 bmw e-36
New stuff....Changed to a back lite LED, adding a 3rd nozzle in the SC volute.
|
#6
|
|||
|
|||
Re: Hfs-3 bmw e-36
very nice. You should take up photography, good pictures.
I believe you are lowering the boss.
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
Re: Hfs-3 bmw e-36
Quote:
The height difference between tanks...and the new pump input swivel. |
#8
|
|||
|
|||
Re: Hfs-3 bmw e-36
Looks like I can say I am done...for now
New adapter from Howerton Eng. As you can see it sits on top of the jet and allows provisions to feed the other two. And the final placement. 2X 0.7 nozzles and a single 0.3 in the volute. |
#9
|
|||
|
|||
Re: Hfs-3 bmw e-36
I can't stop looking through those pictures repeatly. Work of art. Nice utilisation of thise cute little fittings from Howerton.
I aslo heard youn have good success with the controller reading the tec3 ECU. What next, armed with all those cooling jets. Boost to 25psi?
__________________
Richard L aquamist technical support |
#10
|
|||
|
|||
Re: Hfs-3 bmw e-36
Quote:
Not sure what is on the horizon...but I am thinking maybe 17-18psi would be a good place to be. |
|
|